Tormek SE-77 Sharpening Square Edge Jig – Plane Irons Jig


Or4 payments of $36.25 with

Enquire now
Ships free Australia Wide
Free Postage for orders over $100 applies to all orders that are sent via Australia post and does not weigh more than 25kg per item.
14 Days Free Returns
  • Item must be in new condition and not used.
  • Refunds will be processed once your item has arrived.
  • Return postage cost is the customer’s responsibility. If the product is faulty we cover the return cost as well.
Read More
Manufacturer's Warranty
All items are sold with Manufacturer's Warranty. Should your item be faulty within this time, your item will be repaired or replaced. Warranty only covers product defects, it does not apply to regular wear and misuse.

Product Description


  • With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape
  • The SE-77 Square Edge Jig is a further development of the SE‑76 jig. It has been provided with an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other
  • The jig’s construction also makes it possible to position and sharpen tapered chisels, e.g. Japanese chisels. The safety stops keep the jig securely on the Universal Support and prevent the tool from sliding off the grindstone, so there is no risk that you will hurt your fingers when sharpening. The jig fits wood chisels and plane irons up to 77 mm (3″) width
  • Sharpening a convex shape
  • Most types of plane irons can benefit from a slight convex shape. The degree of camber depends on the type of plane and should be approximately the same as the thickness of the shavings. Thanks to the adjustable side on the SE-77 jig, you can achieve the optimal convex shape for your tool


Se 77 Square Edge Jig Tormek
Se 77 Square Edge Jig Convex Shape

When sharpening a convex shape, center the tool under the jig’s center line mark.

Se -77_cambered -shape _500
Se 77 Square Edge Jig 886

The more you loosen the adjustment knobs A and B, the greater the pendulum motion you get, which increases the convexity.

Steady mounting and safe grinding

Se 77 Square Edge Jig 1781

The jig lines up the tool to its upper and flat side. Thanks to the jig’s shoulder (A), it is easy to mount the tool correctly at 90°. The clamping pressure from the ridge in the centre is distributed to the edges, which gives a steady positioning of the tool in the jig, without having to force the locking.

Patents: SE 531 802, EP 1987916, US 9789583, U.S. Des. D651,884 S

Se 77 Top 1276X496

Additional information

Weight 1 kg
Available online Ebay


Delivery & Returns


  • Estimated delivery by 10th August to 13th August
  • Ships free Australia Wide Read More

14 Days Free Returns:

  • Return postage cost is the customer’s responsibility. But if the product is faulty we cover the return cost as well. Read More