Product Description

• Pre-Fit 50 Amp Connectors for Solar Input, DC Output and Output
• 40 Amp charging
• Dual input alternator/solar
• IP65 under-bonnet suitable
• Suits smart and conventional alternators
• MPPT solar charge controller
• The Matson DC to DC charger has been built tough for the Australian environment. Rated at IP65, the charger is impervious to all dust and particles and is splash proof
• Electronically safe against users errors. The charger will not damage vehicle electronics
• Single button chemistry selection
• It can be connected to battery indefinitely, it is totally safe for the battery. No risk of overcharging or draining the donor battery
• Charger can be programmed for different battery types such as GEL, AGM, Deep cycle, SLA, LiFePO and Calcium Batteries
• Microchip monitoring and control
• Electronic touchbutton Control
• Overheat protection
• Over current protection. Charger will automatically reduce current for optimum battery condition
• Input and Output reverse polarity protection

• Charge Type: Multi Stage
• IP65 under bonnet suitable
• Suits battery capacity (Ah): 18 – 250
• Input Voltage (V)DC: Battery: 10.8- 16.0 Solar: 13.5 – 25.0
• Cut in/out Voltage with ignition lead (V)DC: 11.5 – 10.8
• Cut in/out Voltage NO ignition lead (V)DC: 13.0 – 12.4
• Output Current (A): 40
• Minimum start Voltage (V)DC: 2
• Soft Start Charging: Yes
• Case Construction: Aluminium
• Ingress Protection: IP65
• Suits battery capcity (AH): 40-400
• Max Operation Temp (DegC): 70
• Weight (kg): 1
• Dimensions (mm): 135 × 207 × 37

• Gel 14.3
• AGM/Lead Acid 14.7
• Calcium 15.3
• LiFePO 14.4
• Float Charge Voltage (V)DC 13.5
• Float Charge Current (mA) 100