DeWALT DCN692P1-XE 18V XR 5.0Ah Lithium-Ion Brushless Cordless 2 Speed Framing Nailer Combo Kit

In stock

$1,007.00 $559.00You Save $ 448

Or4 payments of $139.75 with

Enquire now
Estimated delivery by 2nd March to 5th March
Ships free Australia Wide
Free Postage for orders over $100 applies to all orders that are sent via Australia post and does not weigh more than 25kg per item.
14 Days Free Returns
  • Item must be in new condition and not used.
  • Refunds will be processed once your item has arrived.
  • Return postage cost is the customer’s responsibility. If the product is faulty we cover the return cost as well.
Read More
Manufacturer's Warranty
All items are sold with Manufacturer's Warranty. Should your item be faulty within this time, your item will be repaired or replaced. Warranty only covers product defects, it does not apply to regular wear and misuse.

Product Description


  • The NEW Type 3 18V XR Cordless Framing Nailer features a completely redesigned motor, delivering 20% more internal energy than the previous model*.
  • Featuring two speed settings, large capacity magazine, adjustable depth setting and dry fire lock out for safety.
  • The DCN692 Type 3 is a high-performance framing nailer delivering outstanding speed, performance, durability and runtime needed for intensive professional applications


  • 18V XR Li-Ion Two Speed Framing Nailer featuring BRUSHLESS motor technology
  • Two speeds – or power levels – to optimise the nailer for firing all lengths of nails
  • Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
  • BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
  • The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
  • Mechanical rather than gas operation offers consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
  • Class leading vibration and sound figures, offer fantastic user protection
  • Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • Reversable belt/rafter hook povides increased portability and versatility on the job-site
  • Depths can be easily adjusted using the thumb wheel depth adjuster
  • Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
  • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
  • Gas free operation offers a significant saving in running costs
  • Tool free stall/jam clearance minimises user down time
  • Cordless design allows you to work without the inconvenience and safety risk of trailing leads
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine


  • Battery chemistry XR Li-Ion
  • Voltage 18 V
  • Battery Capacity NA Ah
  • Nail Diameter 2.8 – 3.3 mm
  • Magazine angle 30 – 34 °
  • Magazine loading Rear – load
  • Nail Length 50 – 90 mm
  • Magazine capacity Up to 55 Nails
  • Trigger Type Bump & Sequential
  • Length 345 mm
  • Width 125 mm
  • Height 338 mm
  • Weight 4.1 kg
  • Nailer Operating Mode Selective
  • Integrated Belt Hook Yes
  • Jam Clearing Yes
  • Temperature Range -20 to 50°C
  • Fault indicator Yes
  • Reversible belt hook
  • Non-mar tip


  • DCN692 Framing Nailer (Type 3)
  • 1 x 5Ah 18V XR Battery
  • Multi Voltage Charger
  • Carry Case

Additional information

Weight 6 kg
Dimensions 40 × 25 × 20 cm
Available online Ebay


Delivery & Returns


  • Estimated delivery by 2nd March to 5th March
  • Ships free Australia Wide Read More

14 Days Free Returns:

  • Return postage cost is the customer’s responsibility. But if the product is faulty we cover the return cost as well. Read More

You may also like…